Program a SwitchBox 56 to run Electrodes 1 to 56
Set a SwitchBox56 to run from 1 to 56 if it has lost it's addressing or was used for another set of addresses and needs to be reset.
Plug in only 1 Switch Box 56 at a time to the SuperSting
Turn the SuperSting on and follow these steps from the Main Menu
- Test Menu (3)
- Program Address (5)
- Address = 1
- Serial Number = 1
- Press F3
- Press Period (.) to confirm
- Set these values next
- Test Menu (3)
- Program Address (5)
- Address=29
- Serial Number =2
- Press F3
- Press Period (.) to confirm
- Label with white tape and a marker that this Switch Box handles Electrodes 1 to 56
- To confirm that you have programmed 1 to 56, run the Relay Test from 1 to 56 as described at the link.